About Pampero

The Endeavour 43 comes from this first generation of sailboats from Endeavour Yachts, a yard that built its early reputation around simple, straight forward, shoal draft designs with big volume accommodation and mediocre sailing performance. True to that formula, the Endeavour 43 was penned by Robert Johnson as a heavy displacement center-cockpit cruiser with large comfortable living quarters and a shoal draft optimized for Florida sailing. The boat was first introduced in 1978, offered in both ketch and cutter rig options, and had a production run that lasted to 1984.

Owners tend to rave about their comfortable well styled accommodations with healthy 6′ 7″ of headroom. The boat can accommodate at least 6 between its forward and aft staterooms and settee berths in the generously sized saloon. The aft stateroom is a particular favorite. Saying the boat has ample stowage is probably an understatement.

The hull of the Endeavour 43 is molded as a single unit of a combination of polyester resin and fiberglass woven roving and multidirectional chopped strand fiber (MCSF). The keel is molded integrally with the hull and all ballast is encapsulated inside.

The deck and cockpit, like the hull, are molded as a single unit of a combination of polyester resin and fiberglass woven roving and MCSF. Plywood coring is incorporated between layers of fiberglass in the cabin top, deck, seat, and cockpit sole areas to give additional stiffness. The non-skid finish is molded into the deck. All exterior deck surfaces are a pigmented gelcoat molded onto the fiberglass.